Mommy & Me monogrammed robes

This past summer I had the blessing of witnessing two of my favourite people tie the knot. To mark the occasion I wanted to send a little something to the bride-to-be and their most precious daughter. After searching around it was settled that monogrammed robes for the two lovelies was the way to go.

At first it seemed like a bit of a challenge but a quick trip to Michaels cured that. These turned out really nice, and were pretty simple.

Supplies:

1 Adult sized robe

1 Child sized robe

Ironing board

Iron

Adhesive rhinestones

Black ink print out of whatever you'd like to monogram 

Method:

Step 1: Wash and dry both garments according to labels

Step 2: Print off whatever it is you would like to monogram. I chose a cursive "K" and "E" so after "googling" the letters, I just printed them out in bold black.

Step 3: Place the print off under the fabric and place the rhinestones on top of the fabric following the print out as your guide. Use a little bit of tape to keep the print off secure under the fabric, just be careful to use only a little. When you heat the rhinestones to secure them some of the adhesive from the tape could transfer onto the back of the garment if too much tape is there.

Step 4: Place the iron on top of the rhinestones, pressing down with equal pressure across all stones for about 10 seconds. Be careful to only put downward pressure on the gems or you could change the placement of the stones.

Then just allow to cool, wrap and gift away.